Commercial restaurant kitchens are equipped with ranges, broilers, fryers and ovens. These appliances, when combined with high temperatures and cooking oils, provide an ideal environment for fire. The best protection against restaurant fires is the installation of a pre-engineered wet chemical restaurant suppression system. Our pre-engineered Kitchen hood wet chemical systems have successfully suppressed many restaurant cooking equipment, exhaust hood and duct fires and are the industry standard.
Pre-engineered wet chemical systems have pre-determined flow rates and quantities of extinguishing agent, as well as the specific pipe sizes and number and types of nozzles prescribed by the manufacturer. It is vitally important to have these systems designed installed by a qualified fire protection contractor. Semi-annual inspections, including fusible link replacement, are also important factors to ensure proper operation in the event of a fire.

Building fire alarm systems range from small, conventional systems to large computer based intelligent, networked systems. Stecome can provide the analysis, design and installation of systems best suited to provide a reliable, code compliant and cost effective solution. Stecome also can furnish and install mass notification alerting systems for commercial, industrial and educational facilities.

Voice evacuation and emergency communications systems provide enhanced messaging to building occupants. Emergency communications systems offer the ability to connect in a network, providing immediate, consistent and detailed messaging to a campus type facility over a wide range of media.

These are critical to helping people exit the building quickly in the event of fire. Stecome offers Emergency and exit Lightings systems that are integrated system along with fire alarm for all types of hazards.

Stecome can design, furnish and install all types of fire sprinkler systems including wet pipe systems, pre-action systems and deluge systems as well as standpipe systems and fire pumps.
Wet Pipe Sprinkler Systems – The most common type of sprinkler system. A sprinkler system employing automatic sprinklers attached to a piping system containing water. This piping system is connected to a water supply so that water discharges immediately from sprinklers opened by heat from a fire.
Dry Pipe Sprinkler Systems – A sprinkler system employing automatic sprinklers that are attached to a piping system containing air or nitrogen under pressure.The release of the air or nitrogen permits the water pressure to open a dry pipe valve, allowing the water to then flow into the piping system and out through the opened sprinklers.
Pre-Action Systems – A sprinkler system employing closed sprinklers attached to a piping system that is connected to a water supply through a valve that is opened by the operation of a fire detection system installed in the same areas as the sprinklers. When this valve opens, water flows into the piping system and discharges out through the open sprinklers.

Deluge Sprinkler System – A sprinkler system employing open sprinklers attached to a piping system that is connected to a water supply through a valve that is opened by the operation of a fire detection system installed in the same areas as the sprinklers. When this valve opens, water flows into the piping system and discharges from all sprinklers attached thereto.

Gaseous agent suppression systems can be provided to protect your high value electronic equipment and facilities where the prevention of business interruption is paramount. These “clean agents” are especially useful to protect banks, telecommunications facilities, computer equipment, control rooms, museums and historical archives. Many of these products provide a “clean and green” alternative to other extinguishing agents.

• 3M™ Novec™ 1230 fire protection fluid suppresses fire primarily by physical mechanisms with minimal effect on available oxygen allowing people to still see and breathe, permitting them to leave the area safely. 3M™ Novec™ 1230 is an environmentally friendly replacement of halon and has been very successful as a fire suppression agent.
• FM-200 is an environmentally-friendly, rapid extinguishing agent which offers versatile clean agent suppression capabilities available for facilities that cannot afford fire-related business interruptions.
• Inergen systems protect enclosed areas where there is a need for quick reaction to a fire, where people may be present, where fire may strike day or night, and where damage from conventional agents cannot be tolerated
• Carbon Dioxide (CO²) systems reduce the oxygen content of the atmosphere to a point where combustion becomes impossible. CO² systems are available in three (3) configurations: total flooding (for unoccupied areas), local application or hand-hose line and are available in both high and low pressure configurations
• Dry Chemical Systems – While not a clean agent, fixed pipe dry chemical systems have a multitude of industrial applications. These include paint spray booths, public transit vehicles, construction and logging machinery, industrial manufacturing processes and powder coating machinery.

Foams

Foams provide the most effective means to extinguish and secure flammable liquid fires. Loading racks, tank farms, aircraft hangars and flammable liquid processing plants are protected with foam systems. A special sprinkler system that is pipe-connected to a source of foam concentrate and to a water supply. The foam-water sprinkler system is equipped with appropriate discharge devices for extinguishing agent discharge and for distribution over the area to be protected. The piping system is connected to the water supply through a control valve that usually is actuated by operation of automatic fire detection equipment that is installed in the same areas as the sprinklers. When this valve opens, water flows into the piping system, foam concentrate is injected into the water, and the resulting foam solution discharging through the discharge devices generates and distributes foam. Upon exhaustion of the foam concentrate supply, water discharge follows and continues until shut off manually. Foam-water sprinkler systems can be used for discharge of water first, followed by discharge of foam for a specified period, and then followed by water until manually shut off. Existing deluge sprinkler systems that have been converted to the use of aqueous film-forming foam or film-forming fluoroprotein foam are classified as foam-water sprinkler systems.

This being the basic fire fighting system and required for all Premises and Facility, our focus is on proper positioning of the Hydrant valves and Hose Reels for easy accessibility in the event of Fire. These systems are designed in compliance with approved international standards. Stecome has designed and delivered right from residential to industries to commercials to high rise facilities. Our capability lies in not just installing these systems but imparting proper training to the end –users and maintains these systems on 24×7 basis. All our products including Fire Extinguishers, Hose Reels and Hydrants are certified by valid third party labs and approved by civil defense department.

Air sampling smoke detection systems provide the earliest possible warning in the event of a fire by taking a continuous sample of air in the protected area. This air sample is analyzed for minute particles generated by the products of combustion and is 1000 times more sensitive than standard ionization or photoelectric spot smoke detectors. When properly designed and installed these systems can detect fire in its earliest stages, alerting personnel and avoiding costly suppression system discharges.